CHANNELSCHANNELS provide continuous support for a variety of applications. They are used to stiffen plastic sleeves, offer strength to other components and provide cosmetic covers. Channels typically have a base, referred to as the “web", with legs on either side. Channels are integrated into framing systems, grating projects, clamping applications and protecting edges. Custom channels are roll formed in aluminum, steel, brass, bronze and copper. |
|
 | C-101 1" x 1", 20 gage roll formed bed rail |
 | C-102 0.5" x 1.5", 18 gage roll formed galvanized channel |
 | C-103 0.6" x 3.3", 24 gage roll formed stainless railroad car trim |
 | C-104 0.2" x 0.4", 20 gage roll formed galvanized channel |
 | C-105 0.4" x 0.8", 26 gage roll formed cold rolled channel |
 | C-106 2" x 9.6", 16 gage panel |
 | C-106 stainless steel roll formed channel |
 | C-107 0.2" x 1.5", 22 gage roll formed insulation support |
 | C-108 0.5" x 0.8", 16 gage roll formed window frame with miter |
 | C-109 0.6" x 1.8", 25 gage roll formed batten corner |
 | C-110 0.5" x 2.3", 25 gage roll formed two leg batten |
 | C-111 0.4" x 0.4", 16 gage roll formed finger channel |
 | C-112 0.2" x 0.4", 20 gage roll formed stainless channel |
 | C-113 0.5" x 1.8", 11 gage roll formed slotted channel Galvanized |
 | C-113 0.5" x 1.8", 11 gage roll formed slotted channel Painted |
 | C-114 0.5" x 0.8", 28 gage roll formed frame support |
 | C-115 0.4" x 1.5", 26 gage roll formed embossed channel with slots |
 | C-116 0.5" x 0.8", 18 gage roll formed window bottom channel |
 | C-117 0.8" x 0.8", roll formed aluminum filter frame support |
 | C-118 0.3" x 1", 26 gage roll formed steel edge trim |
 | C-119 0.4" x 1.2", 14 gage roll formed bulk channel |
 | C-120 0.8" x 1.8", roll formed aluminum filter support channel |
 | C-121 0.4" x 0.8", 28 to 26 gage roll formed painted galvanized channel |
 | C-122 0.8" x 0.9", 18 gage roll formed support channel |
 | C-123 2" x 3", 14 gage roll formed construction frame |
 | C-124 2"x 4", 14 gage roll formed construction frame |
 | C-125 0.6" x 0.8", 23 gage roll formed and lanced channel |
|
Welcome
Custom profiles and
common shapes are roll
formed in gauges from
.005 to .165 and widths
up to 48".
Economical quantities are typically 5,000 ft for existing profiles and 30,000 ft for new shapes. M.P. Metal Products has been dedicated to Roll Forming metal shapes since 1965. Design assistance is available.
Contact Info
M.P. Metal Products Inc.W1250 Elmwood Avenue Ixonia, WI 53036
Tel: 920-261-9650
sales@mpmetals.com |