Roll Formed C-Sections

Another very common and popular part, cee-sections are used in many industries that call for a lighter weight and gauge structural component where a I-beam or T-beam might be too heavy. Also, their shape makes them ideal for use as channels, cable trays, fencing and railings, reinforcements, brackets, etc.

• 
• Cee-101
  1.2" x 1.3", C-101 15 gauge (0.071") roll formed C-section Galvanized. This profile is formed with highly accurate and consistent dimensions. The hot dipped galvanized coating provides corrosion protection. End notches are included with no secondary operation. Standard steel grades are processed, from commercial quality to grade 50. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-101
  1.2" x 1.3", C-101 15 gauge (0.071") roll formed C-section in Stainless Steel. This profile is formed with highly accurate and consistent dimensions. The stainless material provides corrosion protection. End notches are included with no secondary operation. Standard steel grades are processed, usually in annealed material. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-102
  1" x 1", C-102 16 gauge (0.060") roll formed floor support in cold rolled steel. This profile is formed with highly accurate and consistent dimensions. The cold rolled finish is later powder coated to provide corrosion protection. End notches may be included with no secondary operation. Standard steel grades are processed, from commercial quality to grade 50. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-103
  1.3" x 1.6", C-103 14 gauge roll formed fence top rail. This profile is either formed in pre-coated material such as galvanized, or hot rolled pickled and oiled and then post-coated with a dipping process. The top rail is the uppermost horizontal member of a unit of fence framing. Common lengths are 21 feet. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-104
  1.6" x 1.9", C-104 14 gauge roll formed fence post. This profile is either formed in pre-coated material such as galvanized, or hot rolled pickled and oiled and then post-coated with a dipping process. The post is the recurring vertical member of a unit of fence framing. Common lengths are 10 feet. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-105
  1.5" x 1.6", C-105 12 gauge roll formed galvanized C-section. The galvanized process inhibits rust and protects the channel. This profile is formed with highly accurate and consistent dimensions. The hot dipped galvanized coating provides corrosion protection. Slots and end notches can be included with no secondary operation. Standard steel grades are processed, from commercial quality to grade 50. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-106
  1.3" x 2", C-106 18 gauge roll formed receiver arm. The galvanized process inhibits rust and protects the channel. This profile is formed with highly accurate and consistent dimensions. The hot dipped galvanized coating provides corrosion protection. Slots and end notches can be included with no secondary operation. Standard steel grades are processed, from commercial quality to grade 50. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-107
  1.3" x 2.5", C-107 24 gauge roll formed stud. C studs are typically held in place by U studs which sit on the floor and ceiling of a project. A C stud will sit at the end of each U stud, and at predetermined intervals along the wall. This profile is formed with highly accurate and consistent dimensions. The hot dipped galvanized coating provides corrosion protection. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-108
  1.7" x 2.3", C-108 11 gauge roll formed fence post. This profile is either formed in pre-coated material such as galvanized, or hot rolled pickled and oiled and then post-coated with a dipping process. The post is the recurring vertical member of a unit of fence framing. Common lengths are 10 feet. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-109
  1.9" x 4.3", C-109 16 gauge roll formed painted reel bat. This profile is formed in pre-painted material to match an agricultural equipment color scheme. The profile is combined with other mating post to make a finished assembly. Common lengths are 14 feet. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-110
  1.1" x 2.8", C-110 14 gauge roll formed galvanized door track. This profile is formed with highly accurate and consistent dimensions. The hot dipped galvanized coating provides corrosion protection. Holes and notches are included with no secondary operation. Standard steel grades are processed, from commercial quality to grade 50. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-111
  0.2" x 1.3", C-111 roll formed appliance molding C-section in Stainless Steel. This profile is formed with highly accurate and consistent dimensions. The stainless material provides corrosion protection. End notches are included with no secondary operation. Standard steel grades are processed usually in annealed condition. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-112
  0.8" x 1.5", C-112 14 gauge roll formed and powder coated profile. The base material for this profile is hot rolled, pickled and oiled steel. After forming it is powder coated assembled with other components. This profile is formed with highly accurate and consistent dimensions. The cold rolled finish is later powder coated to provide corrosion protection. End holes may be included with no secondary operation. Standard steel grades are processed, from commercial quality to grade 50. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
  

• 
• Cee-113
  1.5" x 3.5", C-113 14 gauge roll formed door frame member. This profile is formed with highly accurate and consistent dimensions. The hot dipped galvanized coating provides corrosion protection. Holes and notches are included with no secondary operation. Standard steel grades are processed, from commercial quality to grade 50. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.