Roll Formed Channels

Channels provide continuous support for a variety of applications. They are used to stiffen plastic sleeves, offer strength to other components and provide cosmetic covers. Channels typically have a base, referred to as the "web", with legs on either side. Channels are integrated into framing systems, grating projects, clamping applications and protecting edges. Custom channels are roll formed in aluminum, steel, brass, bronze and copper.

  • C-101 20 gauge roll formed bed rail
  • C-101
    1" x 1", 20 gauge roll formed bed rail. This roll formed steel channel is basically a U-shaped cross section, with two narrower return legs that capture a mating plastic cover. The profile is produced in cold rolled steel and later powder coated after assembly. Steel channels can serve as girts, studs, braces, joists or other non-structural components to provide limited added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-102 18 gauge roll formed galvanized channel
  • C-102
    0.5" x 1.5", 18 gauge roll formed galvanized channel. This roll formed steel channel is basically a U-shaped cross section, with two shorter return legs. The profile is produced in galvanized steel to match other parts in the assembly. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-103 24 gauge roll formed stainless railroad car trim
  • C-103
    0.6" x 3.3", 24 gauge roll formed stainless railroad car trim. This roll formed steel channel is basically a U-shaped cross section, with two shorter return legs with hems. The profile is produced in stainless steel to match other parts in the assembly. This part serves as a batten cover over a joint in the assembly. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-104 20 gauge roll formed galvanized channel
  • C-104
    0.2" x 0.4", 20 gauge roll formed galvanized channel. This roll formed steel channel is basically a U-shaped cross section, with two return legs. Notches and slots are incorporated in the ends to compliment other mating parts. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-105 26 gauge roll formed cold rolled channel
  • C-105
    0.4" x 0.8", 26 gauge roll formed cold rolled channel. This roll formed steel channel is basically a U-shaped cross section, with two shorter return legs. The profile is produced in cold rolled steel and later powder coated after welding and assembly. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide limited added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-106 16 gauge panel
  • C-106
    2" x 9.6", 16 gauge panel. This roll formed steel channel is basically a U-shaped cross section, with two shorter return legs. The profile is produced in stainless steel to match other parts in the assembly. This part serves as a drainage trough, parts guide, or gutter. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-106 stainless steel roll formed channel
  • C-106
    stainless steel roll formed channel. This roll formed steel channel is basically a U-shaped cross section, with two shorter return legs and an offset on one side. The profile is produced in stainless steel to match other parts in the assembly. This part serve as a drainage trough, parts guide, or gutter. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-107 22 gauge roll formed insulation support
  • C-107
    0.2" x 1.5", 22 gauge roll formed insulation support. The base material is galvanized for corrosion protection in a construction environment. This roll formed steel channel is basically a U-shaped cross section, with two shorter return legs. Slots are incorporated to eliminate secondary operations. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-108 16 gauge roll formed window frame with miter
  • C-108
    0.5" x 0.8", 16 gauge roll formed window frame with miter. This roll formed steel channel is a U-shaped cross section, with two return legs. Notches and slots are incorporated to compliment folding and mating with other parts. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-109 25 gauge roll formed batten corner
  • C-109
    0.6" x 1.8", 25 gauge roll formed batten corner. This roll formed steel channel is a U-shaped cross section, with two return legs on open angles. Slots are incorporated to compliment construction installation and mating with other parts. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-110 25 gauge roll formed two leg batten
  • C-110
    0.5" x 2.3", 25 gauge roll formed two leg batten. This roll formed steel channel is a U-shaped cross section, with two return legs on open angles. Slots are incorporated to compliment construction installation and mating with other parts. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-111 16 gauge roll formed finger channel
  • C-111
    0.4" x 0.4", 16 gauge roll formed finger channel. This roll formed steel channel is a U-shaped cross section, with two return legs. Notches and slots could be incorporated to eliminate secondary operations. This part is powder costed after welding and assembly. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-112 20 gauge roll formed stainless channel
  • C-112
    0.2" x 0.4", 20 gauge roll formed stainless channel. This roll formed steel channel is basically a U-shaped cross section, with two return legs. Notches and slots are incorporated in the ends to compliment other mating parts. Stainless steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-113 11 gauge roll formed slotted channel Galvanized
  • C-113
    0.5" x 1.8", 11 gauge roll formed slotted channel Galvanized. This roll formed steel channel is a U-shaped cross section, with two return legs. Holes are incorporated to compliment assembly and mating with other parts. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-113 11 gauge roll formed slotted channel Painted
  • C-113
    0.5" x 1.8", 11 gauge roll formed slotted channel Painted. Powder coating is accomplished after forming. This roll formed steel channel is a U-shaped cross section, with two return legs. Holes are incorporated to compliment assembly and mating with other parts. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-114 28 gauge roll formed frame support
  • C-114
    0.5" x 0.8", 28 gauge roll formed frame support. This roll formed steel channel is basically a U-shaped cross section, with two longer return legs. The profile is produced in galvanized steel to match other parts in the assembly. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-115 26 gauge roll formed embossed channel with slots
  • C-115
    0.4" x 1.5", 26 gauge roll formed embossed channel with slots. This roll formed steel channel is a U-shaped cross section, with two shorter return legs with hems. The profile is produced in galvanized steel to match other parts in an assembly. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-116 18 gauge roll formed window bottom channel
  • C-116
    0.5" x 0.8", 18 gauge roll formed window bottom channel. This roll formed steel channel is a U-shaped cross section, with two return legs. Stiffening Ribs are incorporated to provide additional strength. This part is later powder costed after welding and assembly. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-117 roll formed aluminum filter frame support
  • C-117
    0.8" x 0.8", roll formed aluminum filter frame support. This roll formed aluminum channel is a U-shaped cross section, with two return legs. Slots are incorporated to provide mounting holes for other components. Aluminum channels can serve as stiffeners, supports, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-118 26 gauge roll formed steel edge trim
  • C-118
    0.3" x 1", 26 gauge roll formed steel edge trim. This roll formed steel channel is a U-shaped cross section, with two return legs. It is run in pre-painted galvanized material. The return legs are angled into the web to capture a button to hold the batten in place. Steel channels can serve as batten covers, stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-119 14 gauge roll formed bulk channel
  • C-119
    0.4" x 1.2", 14 gauge roll formed bulk channel. This roll formed steel channel is a U-shaped cross section, with two return legs. Holes could be incorporated to eliminate secondary operations. This part is later powder costed after welding and assembly. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-120 roll formed aluminum filter support channel
  • C-120
    0.8" x 1.8", roll formed aluminum filter support channel. This roll formed aluminum channel is a U-shaped cross section, with two return legs. Slots are incorporated to provide mounting holes for other components. Aluminum channels can serve as stiffeners, supports, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-121 28 to 26 gauge roll formed painted galvanized channel
  • C-121
    0.4" x 0.8", 28 to 26 gauge roll formed painted galvanized channel. This roll formed steel channel is a U-shaped cross section, with two return legs. It is run in pre-painted galvanized material. Steel channels can serve as batten covers, stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-122 18 gauge roll formed support channel
  • C-122
    0.8" x 0.9", 18 gauge roll formed support channel. This roll formed steel channel is basically a 2 step U-shaped cross section, with two longer return legs. The smaller web area can be used in a tongue-in-groove application. The profile is produced in galvanized steel to match other parts in the assembly. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-123 14 gauge roll formed construction frame
  • C-123
    2" x 3", 14 gauge roll formed construction frame. This roll formed steel channel is a basic U-shaped cross section, with two longer return legs. The profile is produced in galvanized steel to match other parts in the assembly. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-124 14 gauge roll formed construction frame
  • C-124
    2"x 4", 14 gauge roll formed construction frame. This roll formed steel channel is a basic U-shaped cross section, with two longer return legs. The profile is produced in galvanized steel to match other parts in the assembly. Steel channels can serve as girts, studs, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-125 23 gauge roll formed and lanced channel
  • C-125
    0.6" x 0.8", 23 gauge roll formed and lanced channel. The base material is cold rolled steel which is later powder coated after assembly. This roll formed steel channel is a basic U-shaped cross section, with similar height return legs. Lanced points are incorporated to aid assembly and eliminate secondary operations. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-126 Apron channel support cold roll formed in 14 gauge hot rolled steel
  • C-126
    14 gauge apron channel support cold roll formed in hot rolled steel. This roll formed steel channel is a U-shaped cross section, with two return legs. Holes are incorporated to eliminate secondary operations. This part is powder costed after welding and assembly. Steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote
  • C-127 18 Gauge Slotted Channel
  • C-127
    18 Gauge Slotted Channel. This roll formed steel channel is a basic U-shaped cross section, with two return legs. Notches and slots are incorporated along the length of the channel to compliment other mating parts. Galvanized steel channels can serve as stiffeners, braces, joists or other structural and non-structural components to provide added strength. As a coil-based process, economical production quantities begin around 5,000 lineal feet. Custom lengths are available to meet OEM requirements.
    MP Metals - Get a Quote